Read what our customers say about the ELSTEEL Assembly:
- “ELSTEEL saves us money.”
- “Prices are competitive.”
- “We receive the panel when we need it, which helps with our cash-flow.”
- “The panels are robust and ships safely.”
- “I never have to worry about certification, they have them all.”
- “ELSTEEL will paint any colour I want.”
- “I can receive the panel in flat-pack, if I want.”
- “They are really easy guys to work with.”
- “There is no hidden cost.”
- “The modular design allows for easy changes.”
- “With the ELSTEEL system, I can use normal flat copper.”
- “The open Architecture design of the panel allows for easy access to do wiring, saving time and money.”
- “The easy-to-use ELSTEEL Constructors Manual is empowering. I can check every detail of the assembly.”
The ELSTEEL MCC (Low Voltage Assembly) is modular in steps of 200 mm increments in all three directions, which means that there is no limit to the possibilities and positions.
The strong framework is made from 2mm electrogalvanised powder coated steel profile that forms a 25mm grid which can be arranged in an unlimited number of ways.
The busbar system of the Motor Control and Power Distribution system incorporates the use of 10 mm thick flat bars in either copper or aluminium. The holders are made from special formulated plastics, and can be mounted in any position inside the framework.
Separation plates divide the panel into any form of segregation you wish, Up to Form 4b.
Fully Withdrawable
This is beyond doubt the fastest and most successful way of changing starters. The heavy duty solid stainless steel mechanism ensures many years of reliable operation. The optional digital diagnostic display informs the operator of the different positions of the drawer, as well as temperature / amps / voltage / r.p.m.s. etc.
Form 3 + 4
With these separation plates installed it is possible to work in one section of the panel board while the rest of the panel is live. Separation plates prevent foreign objects or particles resulting from a short circuit in one section, to contaminate the whole panel. Thereby preventing the risk of complete panel damage.
Arc Faults
Arc Filters have been included in the design of the separation plate. Once you install the standard chimneys – your enclosure is arc safe. This means that no flames or solid objects will explode towards the operator in front of the panel.
Testing and Finish
Each and every panel is tested by the panel builder/ integrator in accordance with specifications from the Constructors Manual and the routine test specified in IEC 61439-1 before shipment.
The surface of the panel is powder coated in textured finish. It’s easy to maintain and will look as new for many years. The standard stock colour is RAL 2000, and the frame black. The mounting plates are Galvanized and the colour can be customized to the client’s requirement.
Phosphated and chromepassivated pretreatment makes the panel suitable for tough tropical conditions.
Degree of protection of the Motor Control and Power Distribution system is up to IP55
For more information regarding the ELSTEEL Motor Control and Power Distrubution System (LV Assemblies) contatct us or send us an online enquiry
Module for RS422 / HTL Signals (up to 3000m) LW213:
- 4 independent input channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422], also possible for single channel
- 4 output channels with format A, B, C, D [HTL] or A, /A, B, /B, C, /C, D, /D [RS422]
- Maximum input frequency 1 MHz
- Very short conversion time < 300 ns
- Optical wavelength 1300 nm
- Transmission distance up to 3000 meters
- Power supply 5 VDC (for LW213)
- Power supply 10 … 30 VDC (for LW213-1, LW213-2, LW213-3)
- Snap-on housing for top hat rail (according to EN 60715)
- Pre-configured optical fibers available
Short description on LW213:The LW213 and LW214 fiber optic modules together form an optical transmission system for the data transmission of incremental sensor or encoder signals via an optical waveguide. |
One can connect to differential signals of any other source with RS422 or push-pull HTL levels (eg. incremental length measuring systems, glass scales, etc.).Transmitter and receiver modules each have four completely independent channels with differential inputs and outputs. Signals can be transmitted on all four channels with a maximum data rate of 2 Mbit/s.
The component with the designation LW213 serves as a transmission module for a light wave transmission up to 3000 meters. It converts the incremental signals of conventional sensors, measuring systems or rotary encoders into optical fiber signals.
Cable Extension Position Transducers
Short description:
The Celesco PT8CN Analog Cable Extension Position Transducer, using a high cycle plastic-hybrid potentiometer, communicates to your PLC via the CANbus SAE J1939 interface. Suitable for factory and harsh environment applications requiring linear position feedback in ranges up to 60”. As a member of Celesco’s innovative family of NEMA 4 rated cable-extension transducers, the PT8CN installs in minutes by simply mounting it’s body to a fixed surface and attaching it’s cable to the movable object.
DC Motors
